D300XT Tapping & Drilling Machine
The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4″ (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1″(25mm) by using twist drill bits.
Variable Speed Magnetic Drilling & Tapping Machine
The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe, and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads.
Features of the D300XT
- 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes
- 1600 W motor
- Overload & Overheat protection
- Tapping of through and blind holes with intelligent load control
- Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters
- Full electronic motor control
- Electronic clutch (faster than mechanical)
- Rigid design extends tool life
- Innovative smart magnet with reduced weight
- Intuitive control panel at top of the drill
- Large coolant reservoir
D300XT Technical Specifications
| Feature | Parameter |
|---|---|
| Motor Speeds (Under Load): | 120-190 rpm (gear1) 290-450 rpm (gear 2) |
| Motor Power | 1600 W |
| Voltage | 115 V, 50-60Hz 230 V, 50-60 Hz |
| Max Hole Size-Annular Cutter | 2-3/4 " (70 mm) |
| Max Drilling Capacity | 1" (25 mm) |
| Max Tap Size | 7/8" (M20) |
| Max Depth of Cut | 2 15/16" (75 mm) |
| Stroke | 7.5" (190 mm) |
| Magnetic clamping force (surface with the thickness of 25 mm and roughness Ra=1.25 | 2472 ft. lbs. (1121kg) |
| Magnet base dimensions | 3.6" x 7.1" x 2.1" 92 mm x 180 mm x 54 mm |
| Min. Workplace Thickness | 0.3" (8 mm) |
| Spindle | MT3 |
| Tool Holder | 3/4" (19 mm) Weldon |
